Pressure, temperature and level measuring
A-10
Pressure transmitter for general industrial applications Model A-10
– Pressure ranges: from 0 … 1 bar up to 0 … 600 bar
– Non-linearity: 0.25 % or 0.5 %
– Signal output: 4 … 20 mA, 0 … 10 V, 0 … 5 V and other
– Electrical connection: DIN 175301-803 A and C, M12x1, Flying leads 2m
– Pressure connection: G1/4 DIN 3852-E, 1/4 NPT and others
S-10
Pressure transmitter for general applications
– Pressure ranges from 0 … 0.1 bar to 0 … 1000 bar
– Various industrial standard signal outputs
– Wiring with connector or flying leads
– Stock program for short delivery times
– Vacuum tight
S-11
Pressure transmitter for general applications
– Pressure ranges from 0 … 0.1 bar to 0 … 1000 bar
– Various industrial standard signal outputs
– Wiring with connector or flying leads
– Stock program for short delivery times
– Vacuum tight
SA-11
Pressure Transmitters for Sanitary Applications
– Wide range of aseptic process connections
– Flush diaphragm with a surface roughness of Ra < 0.4 μm
- All welded construction 3-A and EHEDG certified
- Ingress protection up to IP 68
IS
Intrinsically Safe Pressure Transmitter for applications in hazardous environments
– Pressure ranges from 0 … 0.1 bar to 0 … 1,000 bar
– Ex- protection Ex ia I/II C T6 according to ATEX for: Gases, vapours and mist: Zone 0, Zone 1 and Zone 2; Dust: Zone 20, Zone 21 and Zone 22; Mining: Category M1 and M2
-FM, CSA approval for:
– Intrinsically safe Class I, II and III Division 1, Group A, B, C, D, E, F, G
– Dust Class II und III Division 1, Group E, F, G
– Class I, Zone 0, AEx ia II C
suitable for SIL 2 according to IEC 61508/ IEC 61511
PSD-30
Electronic Pressure Switch with Display
– Easily-readable, robust 14-segment LED display; electronically 180° rotatable
– User-friendly 3-key operation
– Easy menu navigation (according VDMA Standard)
– Flexible installation with independent rotation between the M12 connection (320°) and the display (330°)
– Configuration with IO-Link interface (optional)
UT
Universal transmitters for various applications
– Scaleable measuring ranges via Turn Down of up to 1 : 20
– Measuring range from 0 … 5 mbar up to 0 … 4,000 bar
– High measuring accuracy
– Fully welded, stainless steel diaphragm
– Multifunctional display
111.10
Bourdon Tube Pressure Gauge
– Reliable and economical
– Design EN 837-1
– Nominal sizes 40, 50, 63, 80, 100 and 160
– Scale ranges up to 0…400 bar
111.12
Bourdon Tube Pressure Gauge
– Reliable and economical
– Design EN 837-1
– Nominal sizes 40, 50, 63, 80 and 100 mm
– Scale ranges up to 0…400 bar
111.16
Bourdon Tube Pressure Gauge
– Reliable and economical
– Design EN 837-1
– Nominal sizes 40, 50, 63, 80 and 100 mm
– Scale ranges up to 0…400 bar
113.53
Bourdon Tube Pressure Gauge
– Vibration and shock resistant
– Particularly robust design
– Stainless steel case
– Scale ranges up to 0 … 400 bar
212.20
Bourdon Tube Pressure Gauge
– Long service life, robust
– Cost-effective and reliable
– To combine with WIKA diaphragm seals
– German Lloyd and Gosstandart approval
– Scale ranges up to 0 … 600 bar
312.20
Bourdon Tube Pressure Gauge
– Knife edge pointer for optimal accuracy of reading
– Precise movement with wear parts of argentan
– Scale ranges up to 0 … 600 bar
232.50
Bourdon Tube Pressure Gauges Stainless Steel Series
– Excellent load-cycle stability and shock resistance
– All stainless steel construction
– German Lloyd, Gosstandart and DVGW approval
– Scale ranges up to 0 … 1600 bar
233.50
Bourdon Tube Pressure Gauges Stainless Steel Series
– Excellent load-cycle stability and shock resistance
– All stainless steel construction
– German Lloyd, Gosstandart and DVGW approval
– Scale ranges up to 0 … 1600 bar
632.50
– Capsule Pressure Gauges Stainless Steel Series
– Zero adjustment in front
– All stainless steel construction
– Special connection location on request
– Low scale ranges from 0 … 2.5 mbar
422.12
Flush Diaphragm Pressure Gauges
– Dry measuring cell, no transmission liquid
– Wetted parts and covering metallic components made of stainless steel
– Hygienic-type connection for direct, fast installation and removal
– Suitable for CIP-facilities
– Scale ranges from 0 … 0.6 bar to -1 … 4 bar
611.10
Capsule Pressure Gauges
– Zero adjustment in front
– Special connection location on request
– Low scale ranges from 0 … 25 mbar
611.12
Capsule Pressure Gauges
– Zero adjustment in front
– Case made of stainless steel
– Special connection location on request
– Low scale ranges from 0 … 6 mbar
700.01
Differential Pressure Gauges
– Differential pressure measuring ranges
Model 700.01: from 0 … 400 mbar to 0 … 10 bar
Model 700.02: from 0 … 160 mbar to 0 … 2.5 bar
– Sturdy and compact system case made of stainless steel
– High working pressures (static pressures), optionally 100, 250 or 400 bar (Model 700.02 to 100 bar max.)
– Overpressure safe either side to maximum working pressure (exception for Model 700.02: see table page 2)
– System and/or case of indication may be changed locally
– Reed contacts may also be adjusted and retrofitted locally
990.36
Threaded Process Connection, Small Diaphragm Seals with Flush Diaphragm
– Small dimensions
– Flush diaphragm
– No dead spaces
– Special version with protection disc for abrasive media
A46
Bimetal Thermometers For heating
– Reliable and economical
– Nominal size 50, 63, 80 and 100
– Scale ranges up to -30 … 120 °C
52
Bimetal Thermometers Industrial Series
– Scale ranges from -30 °C to +500 °C
– Case and stem material stainless steel
– 5 different designs of connection
– Combination with many thermowell designs