Frequency Inverters
J1000
The new J1000 inverter has been designed to become the basic inverter in applications like conveyors, fans and pumps with small power ratings. It’s so easy to install, set-up, operate run but at same time covering all the needs for such a kinds of applications.
– V/F controlled inverter
– Good torque performance (150% / 3 Hz)
– Double rating ND 120%/1min and HD 150%/1 min
– Overload detection function (150% during 60s)
– Optional RS-232C/485 communication – Modbus
– Programming software: CX-drive for parameter configuration
V1000
Thanks to the patented design of the V1000 series (VZA) and modern manufacturing, it is built for a 10 year life-time without maintenance. The new features guarantee a 100% expectation match and with a field failure rate of less than 1 in 10,000, the new V1000 series inverter will outperform all other inverters long after it has been implemented.
– Up to 15kW / 18.5kW
– Built-in filter
– Current vector control
– IM and PM motor control
– Embedded safety stop function Category 3 (EN954-1)
A1000
High performance vector control
– Current vector control, with or without PG
– High starting torque (200% / 0.3 Hz, spd range 1:200 OLV), (200% at 0 r/min, spd range 1:1500 CLV)
– Double rating ND 120%/1min and HD 150%/1 min
– Advanced Auto-Tuning for IM & PM Motors
– Open Loop Control of PM Motors
– Low-noise Low carrier technology
– 10 years lifetime design
– Screw-less terminals
– Control Terminals with memory backup
– 24 VDC control board power supply option
– Fieldbus communications: Modbus, Profibus, CANopen, DeviceNet, ML-II, PROFINET, EtherCAT and EtherNet/IP
– Safety embedded: EN954-1 safety cat. 3, stop category 0, IEC EN 61508 SIL 2 and EN61800-5-1 with EDM
– Regenerative solutions as option
– CE, UL, cUL and TUV
LX
Born out of Omron’s know-how and experience within the lift market, the LX can control gearless or geared systems. Designed for more than 5 million starts at 150% output current, the LX offers the high quality standards that you have come to expect, including noiseless operation and efficient motor control. The built-in clock & calendar and programming functionality offers flexibility in your application control.
– Full lift sequence
– Patented high accuracy static tuning and rotary auto-tuning
– IM and PM motor control
– Dual encoder option (Incremental, EnDat and Hiperface)
– Floor positioning auto-learning function of up to 40 floors
– Lift language (Hz, m/s, rpm…)
– Current vector control with or without PG
– High starting torque (200%/ 0.3 Hz sensorless vector – 150%/ 0 Hz closed loop vector control)
– RS485 communication built-in –Modbus RTU–
– CE, cULus, RoHS
SX
The new SX inverter is designed to drive high power applications, anything from pumps, fans, compressors or blowers through to closed loop vector control required by cranes, crushers, mills or mixers. The standard inverter has built-in application oriented software and it’s hardware design provides flexibility to the user.
– 500V – 690V power supply from 90kW up to 1000kW
– 400V power supply from 0.75 kW up to 800 kW
– Compact design IP54 full range
– Built-in Filter according to C3 Class
– Safety according to EN13849-1 and EN62061 standards
– Load curve control
– Logic programmability
– Built-in special application functionality as Multi-pump control or Crane applications
– Hardware customisation (Main switch, Liquid cooling, 12-pulse rectifier, … )
– Fieldbus communications: EtherCAT, PROFINET, Modbus, DeviceNet, PROFIBUS, Modbus TCP
JX
With the RFI filter built-in and communications integrated as standard, the JX provides a compact and complete solution to a whole range of simple applications. The RS485 Modbus is built into the RJ45 port of the inverter front, making it very easy to add inverters into the network without any extra option boards. Therefore, saving costs and space.
– V/f controlled inverter
– Side by side mounting
– Built-in EMC filter
– Built-in RS-485 Modbus
– Overload detection function (150% during 60 s)
– PID
– Micro-surge voltage supression
– Automatic energy saving
– Emergency shut-off
– Second motor setting
– Auto carrier-frequency reduction
– PTC thermistor input
– Cooling fan switch control
– PC configuration tool: CX-Drive
– CE, UL, cUL, RoHS.
MX2
Specifically created for your application, the MX2 was developed to harmonise advanced motor and machine control. Thanks to its advanced design and algorithms, the MX2 provides smooth control down to zero speed, plus precise operation for cyclic operations and torque control capability in open loop. By using the standard MX2 series functionality and communication option boards, the MX2 IP54 is the perfect choice for your standalone inverter solutions.
– Up to 15 kW
– 200% starting torque
– Torque control in open loop
– Double rating VT 120%/1 min and CT 150%/1 min
– IM & PM motor control
– Safety conforming to ISO13849-1 Category3 performance level PLD
– Built-in Logic programming
– Positioning functionality
– Integrated at Omron machine Automation solution
– Fieldbus communications: EtherCAT, Modbus, DeviceNet, Profibus, CompoNet, MECHATROLINK-II and EtherNet/IP
RX
Omron realises that you need quality and reliability, plus the ability to easily and quickly customise your inverter to the application in hand. And with the RX, you have the perfect tool for the job. Naturally it combines the same high level of quality and performance for which Omron is renowned. It also has abundant application functionality on board and you can customise it yourself to match your precise requirements.
– Ratings up to 132 kW
– Full torque at 0 Hz in closed loop
– Sensor-less and vector closed-loop control
– Built-in EMC filter, logic programming and application functionality
– Fieldbus communications: Modbus, DeviceNet, PROFIBUS, MECHATROLINK-II, EtherCAT and CompoNet
– Regenerative solutions as option
– CE, cULus, RoHS