SIGMA-5
There are no compromises when it comes to the quality, reliability and performance of the Sigma-5. It is designed to provide all that one expects from a servo and more.
– Sizes from 50 W to 15 kW, rated speeds of 1500 and 3000 rpm
– Peak torque 350% of nominal during 3 seconds
– Automatic motor recognition by servo drive
– IP67 and shaft oil seal available
– High resolution encoders
– Absolute multiturn encoder resolution
– Compact design and robust construction

ACCURAX G5
Accurax G5 servomotors include IP67 protection and connectors on the motor body. Use of 10 pole motors and 20 bit encoder results in 40% reduction in motor cogging. The servomotors are 25% lighter and 15% smaller due to patented new stator design PAC-Clamp, 40% iron loss reduction and 15% smaller encoder.
– Sizes from 50W to 15 kW, rated speeds of 1000 rpm, 1500 rpm, 2000 rpm and 3000 rpm
– Peak torque 300% of continuous torque during 3 seconds or more depending on model
– High accuracy provided by a 20 bit resolution encoder, ABS encoder as an option
– IP67 protection in all motor models
– Low speed ripple and low torque ripple due to low torque cogging
– Compact design and robust construction including smart connectors
– No motor settings required, just plug and run

G-SERIES
A wide range of compact servomotors to meet all application needs. When used with a SmartStep 2 drive, the G-series servo motors offer the simplicity and cost-effectiveness of a stepper with the added advantages of a servo system.
– Sizes from 50 W to 1.5 kW, rated speed 3,000 rpm
– Peak torque 300% of continuous torque during 3 seconds or more depending on model
– Servomotors supported by SmartStep 2, G-Series and Accurax G5 servo drives
– Encoder accuracy of 10000 steps/rev as standard and 17 bits-INC/ABS as optional
– Cylindrical and Flat servomotor types are available
– IP65 as standard and shaft oil seal available
– Motors with brake as an option
– No motor settings required, just plug and run

ProNet Series
The ProNet series servo drive completely pursues the simplicity of utilization to automatically determine mechanical characteristic and set needed servo gain. Besides, it achieves ‘on-line automatically adjustment function’. Automatic adjustment of servo system to meet mechanical characteristic enables less debugging time and simpler operation. Even for the first time to use it, it can finish the best optimized setting in a short time.

SMARTSTEP
The new SmartStep offers an ideal solution for point-to-point motion applications where simplicity is essential. SmartStep 2 keeps things simple whilst combining high performance and advanced features in a cost effective solution.
– Ultra-compact size. The footprint is only 48% compared to the previous SmartStep
– Vibration suppression
– Adaptive resonance suppression filter
– Feedback pulse output
– On-line Auto-tuning and Easy set up
– Electronic gear, four internal speed settings and wide range of pulse settings
– Two torque limits
– Position control via pulse input 500 kpps
– Configuration and commissioning using CX-Drive software