Anaerobic threadsealing adhesives seal and lock threaded connections against pressure of gas, air, water, oils, hydrocarbons and many chemicals.
They replace hemp and P.T.F.E. tapes and are available in various grades of locking strength with resistance to various chemicals. Certified according to various international standards, e.g. DVGW, NSF, WRAS, KTW, BAM.
Anaerobic threadlockers lock studs, nuts, screws and any threaded fasteners. The adhesive prevents loosening caused by vibration, mechanical and thermal shock.
Threadlocking adhesive also inhibits fretting corrosion and prevents the seizure and galling.
Gasketing anaerobic adhesive seals flat mating surfaces and joins flanges on pumps, gearboxes and differential housings. It replaces preformed gaskets and allows contact between metal parts forming a seal which is not prone to creep or relaxation.
Formas a flexible and / or elastic gasket which is resistant to vibration, heat, oil and other industrial fluids. Parts can be disassembled using normal tools.
Retaining anaerobic adhesives lock and fit bushes, bearings, sleeves, pin hubs, pulleys, gears and other cylindrical components.
They are ideal for increasing the strength of press fit parts or retaining loose fitting parts, allow larger machining tolerances, reducing manufacturing costs, prevent fretting corrosion, vibration loosening and distortion.
Retaining adhesives have excellent chemical resistance and seal against most fluids.
Activators, Surface Conditioners, Primers, Cleaners
The activators are specially designed products to speed up the cure of Anaerobic Adhesivest. Typical conditions of use are low temperatures, large gaps, inactive or passive surfaces.
Light Curing Adhesives
UV light curable adhesives polymerise in seconds by irradiation with UV and visible light, forming a solid adhesive film not yellowing over time. Designed to bond glass, crystal, metals and some plastics.
A gel formulation is available for non-drip / vertical applications.
Structural Acrilic Adhesives
2-Component adhesives cure by contact (drop on drop, bead on bead).Curing time from 1 to 5 minutes. Suitable for bonding metals,ferrite,ceramics,wood and some plastics forming high strength durable joints with high impact, peel and tensile strength.
Impregantion of Porous Metal Parts
Low viscosity methacrylate resins for sealing metal micro porosity by vacuum impregnation of castings and sintered metal parts for automotive, pneumatic and hydraulic components.
LOXEAL impregnation products meet the standards MIL-STD276, MIL-I-17563B and most automotive companies specifications.
Loxeal® Dosing Systems are designed to fulfil customer’s dispensing needs.
Cyanacrylate adhesives are for the instant and structural bonding of rubber, metals, ceramic, leather and a variety of plastics. Best results can be obtained with joint gaps of less than 0.1mm up to 0.2mm for special grades.
The service temperature range is between -50°C and +80°C, although new high-temperature resistant formulations are available for use up to 200°C. For porous surfaces or for vertical application a gel grade is available.