2 Mechanical
Series 2 mechanically operated miniature valves, 3/2-way normally closed, are available with M5 threaded ports or with an integrated super-rapid fitting for ø 4mm tubes. The devices are actuated by a plunger, roller/lever or a unidirectional lever.

1 and 3
Series 3 3/2-way monostable valves are normally closed in the rest position when pressure is supplied in 1 and are normally open when pressure is supplied on connection 3, the user port 2 remaining unchanged. Series 3 5/2-way valves can be supplied via the ports 3 and 5 with two different pressures if a cylinder has to be operated using a delivery pressure which is different from the return pressure.

3 and 4
The particular mechanical device allows these end-stroke valves to operate with very low actuating forces. Series 3 has been designed with a mechanical lever device which works in negative pressure. To increase sensitivity it is possible to add to the lever a steel extension with ø 3 mm.

2 Manually Operated
This series of miniature valves has been especially designed to satisfy all the application requirements of the controls industry with particular attention paid to the operating characteristics required from these components: – short operational stroke – small dimensions

DATASHEET

1.3.4 and VMS
Series 3 manual valves (G1/8) and Series 4 (G1/4), 3/2 – 5/2-way and 5/3- way, are available with several devices designed to satisfy different needs. The 3/2-way valves Series 3 and 4 are normally closed when 1 is the inlet; they can also be normally open when 3 is the inlet.

Foot operated pedals
The pedals can be supplied in either a pneumatic or electrical foot operated version. The pneumatic type is available with a 5/2 valve and G1/4 front ports, which allow the fittings and silencers to be assembled conveniently on the front face. A 3/2 operation can be obtained by closing an outlet port. The electrical type is available with a single-pole changeover contact microswitch and a front wire outlet (PG9).

Mini-handle valves series 2
Handle with incorporated micro valve 3/2 NC and NO Handle with incorporated micro switch