General Application
21A
Wide range of application valves for liquids and gas
– Reliable proven design with high flow
– Small poppet valve for tight shutoff
– Wide range of elastomers
– Mountable in any position
21T
Direct acting solenoid valve, 2/2 NC, doesn’t require minimal pressure.
21L
Direct acting solenoid valve, 2/2 NC, doesn’t require minimal pressure, applicable with aggressive chemicals.
21JN
Direct acting solenoid valve, 2/2 NC, doesn’t require minimal pressure, PPS body.
21JP
Direct acting solenoid valve, 2/2 NC, doesn’t require minimal pressure, PPS body.
21D-K
Direct acting solenoid valve, 2/2 NC, doesn’t require minimal pressure, PSU body, total separation valve
31A
Direct acting solenoid valve, 3/2 NC, doesn’t require minimal pressure, brass body.
31L
Direct acting solenoid valve, 3/2 NC, doesn’t require minimal pressure, stainless steel body.
31J
Direct acting solenoid valve, 3/2 NC, doesn’t require minimal pressure, brass body.
21H
Diaphragm pilot controlled solenoid valve, 2/2 NC, requires minimal pressure, brass body.
21W
Diaphragm pilot controlled solenoid valve, 2/2 NC, requires minimal pressure, brass body.
21X
Diaphragm pilot controlled solenoid valve, 2/2 NC, requires minimal pressure, stainless steel body.
21YW
Diaphragm pilot controlled solenoid valve, 2/2 NC, requires minimal pressure, brass body.
21PW
Diaphragm pilot controlled solenoid valve, 2/2 NC, requires minimal pressure, brass body.
21HT
Diaphragm combined operation valve, 2/2 NC or NO, doesn’t require minimal pressure, brass body.
21HF
Diaphragm combined operation valve, 2/2 NC or NO, doesn’t require minimal pressure, brass body.
21IH
Diaphragm combined operation valve, 2/2 NC or NO, doesn’t require minimal pressure, stainless steel body.
21A2K0T12-XC
High pressure solenoid valve, port G1/4, Direct acting solenoid valve, 2/2 NC.
4731K0T70
High pressure piston pilot controlled solenoid valve with port G3/8. 2/2, NC, requires minimal pressure. Brass body.
4966K0Q120
High pressure piston pilot controlled solenoid valve with port G1/2. 2/2, NC, requires minimum pressure. Brass body.
4592MZU190
High pressure piston pilot controlled solenoid valve with port G3/4. 2/2, NC, requires minimum pressure, brass body.

EXPLOSION PROOF VALVES
Available are models with security: “d” (explosion proof case) and “m” (sealed coils), suitable for Zone 1 and 2, Group 2, Cat. 2 and 3. Available are series 21A, 21L, 21W and 21X, 21IH. For more information contact us.
Coils
The range of ODE coils includes 5W, 8W, 12W and 14W types with different dimensions.
P992087
The condensate removal timer is a plug-on controller specially design for drain valves. The unit offers an easy time cycle programming. The draining time can be set via the “ON” trimmer between 0.5 and 10 seconds. The “OFF” trimmer allows to adjust the delay time between two draining cycles from 0.5 to 45 minutes. The unit is ready to control the valve as soon as the power is switched on. The ON/OFF sequence will be repeated so long as the unit is fed. Two LED’s indicate the output status. A “TEST” button is provided to check the cycle settings and to restart the control sequence from the output status “ON”.
5254K0V45-W
Automatic condense separator valve.
PT
Serie PT has body in stainless steel AISI 316L, ceramic pressure sensor and it’s able to ensure compatibility with a wide range of substances and application sectors. Structural and functional characteristics of the product ensures high accuracy and reliablity over time. It’s ideal to control the pressure in the most common industrial applications like for example the monitoring of the process variables in chemical and petrochemical application, or even for a precise and accurate verification of pressure to brew coffee in the vending industry.