VTCF
Universal suction pads in NBR or Silicone. Diameters from 3.5 to 95 mm with thread size M3, M5, G1/8, G1/4, both male and female.

VTОF
Flat suction pads in NBR or Silicone which, thanks to their oval shape, can be used to handle narrow and long workpieces. Diameters from 7×3,5 to 60×20 mm with thread size M3, M5, G1/8, G1/4, both male and female.

VTCL
Series VTCL bellows suction pads available in NBR or Silicone which allow an optimal damping when placed on the workpiece. Diameters from 11 to 53 mm with thread size M5, G1/8, G1/4, both male and female.

VTCN
Series VTCN bellows suction pads, available in NBR or Silicone, are suitable to handle uneven workpiece surfaces or workpiece major height differences. Diameters from 5 to 52 mm with thread size M5, G1/8, G1/4, both male and female.

VEB
Basic ejectors with no moving parts, based on the Venturi principle. Version “L” for porosive workpieces. Version “H” for high vacuum value.

VEBL
Basic ejectors in technopolymer without moving parts, based on the Venturi principle. Different sizes available, with internal nozzle from 0,5 to 2,5 mm and with suction rate from 8 to 207 l/min.

VED
Vacuum ejectors without moving parts, based on the Venturi principle, used for direct installation on suction pads.

VEDL
Vacuum compact ejectors in technopolymer without moving parts, based on the Venturi principle, used for direct installation on suction pads. Available in two sizes with internal nozzle of 0,5 and 0,7 mm and with suction rate from 8 to 16 l/min.

DATASHEET

VEC
Vacuum generators with integrated valves and monitoring system. Possibility to command suction and blow-off individually without using external valves.

VEM
Miniaturized vacuum generators with integrated valves and monitoring system. Possibility to command suction and blow-off individually without using external valves.

NPF
The vulcanisation provides flexibility in all directions. Thread G1/4.

NPM/NPR
These spring plungers are used in situations where significant height differences of the workpiece have to be compensated for. Thread size M3, M5, G1/8, G1/4, plunger stroke length from 5 to 75 mm.

VNV
These check valves are mainly used on vacuum gripper systems containing multiple suction pads in order to shut off individual suction pads which are not covered. Thread size M5, G1/8, G1/4, G3/8, G1/2.

FVD
For use in vacuum systems with minor to medium levels of dirt. Direct mounting on the suction pad.

FVT
Used as pre-filters and fine filters for air with varying amounts of contamination, for the protection of the vacuum generator. Mounted as protection for the ejector.