G7Z
G7Z series provides a compact, cost efficient solution for applications such as inverters, UPS, solar and fuel-cell battery circuits. Relay in combination with auxiliary contact block meets EN 60947-4-1. Coil ratings are available in 12 and 24 VDC. Power consumption is less than 4 watts.
– Switching current 160 A (40 A rating / 4-pole / IEC-AC1)
– Switching voltage 440 VAC
– Safety function with mirror contacts in various configurations
– Power consumption less than 4 Watts
– Low Switching Noise (70 dB)

G7L
A high-capacity, high-dielectric-strength relay compatible with momentary voltage drops. G7L is equipped with a double-break mechanism and a test button (excluding -P models).
– SPST-NO or DPST-NO contact types
– Quick connect, PCB or screw terminals
– 20, 25 or 30A rated load
– Compatible with momentary voltage drops
– Wide range of applications with 100 or 200V coils

G7J
With a rated load current of 25A due to the miniature hinge for maximum switching power, the G7J can switch both motor loads as well as resistive and inductive loads. G7J has no contact chattering for momentary voltage drops up to 50% of its rated voltage.
– 4PST-NO, 3PST-NO / SPST-NC or DPST-NO / DPST-NC contact types
– Quick-connect, PCB or screw terminals
– 25A rated load
– Compatible with momentary voltage drops
– Can be used like a contactor

MK-I/-S
– Breaks relatively large load currents despite small size.
– Long life (minimum 100,000 electrical operations) assured by silver contacts.
– Built-in operation indicator (Mechanical, LED), push button, diode surge suppression, varistor surge suppression.

LY
The LY series is equipped with arc barrier and built-in diode. LY comes in single-, double-, three- and four-pole models. The available mounting types are DIN-rail by socket, PCB & flange mounting.
– SPDT, DPDT, 3PDT and 4PDT contact types
– DIN-rail by socket, PCB and flange mounting types available
– 10A rated load

MY
Over 1 billion pieces of this mini power relay have been manufactured since its introduction and have successfully been used in many different applications. Bifurcated contacts are optionally available to achieve reliable low current switching during the entire electrical life. Full range of sockets covering mounting by screw, box clamp and screw-less clamp method.
– DPDT type 10 A / 4PDT type 5 A
– Mechanical flag, LED indicator and momentary / lockable testbutton optional
– Transparent housing
– Low power switching (1 mA at 5 VDC) / Bifurcated 4PDT (0.1 mA at 1 VDC)
– Screw-less clamp terminal sockets available

G2RS
G2RS series, which comes as standard with a mechanical indicator and nameplate covering a wide range of interface applications. Optionally available with gold clad contacts and diode, whilst the socket and crossbar range offer maximum flexibility during installation.
– SPDT type 10A / DPDT type 5 A
– Mechanical Flag, LED indicator and momentary / lockable testbutton optional
– Transparent housing
– Screwless clamp terminal sockets available
– Space saving – 16 mm width (including sockets)

DATASHEET

G2RV
Having been designed from first principles, instead of being adapted from a PCB relay, Omron’s G2RV series is the only genuine slim industrial relay on the market. As a result, the G2RV offers a wide array of benefits to machine manufacturers and panel builders. Just 6mm wide, the relay is ideal for compact panels and equipment, yet it offers all of the durability and reliability required for industrial applications.
– Push-in plus Technology – easy wiring
– Lockable test switch models available
– Large plug-in pins – excellent connection
– LED/mechanical flag – check operation
– Transparent housing – check condition
– Slim outline – space saving
– Special input type with gold plated contacts

DATASHEET

G3ZA
The G3ZA receives manipulated variables generated by control loops or manual settings via a simple-to-wire RS-485. It regulates the heater power with high precision by driving up to eight standard SSRs. Moreover, the offset control reduces peak power in the supply net.
– Multi-channel power controller
– Controls up to eight standard solid state relays
– Easy integration with PLC
– Compact size
– Available with heater alarms (four channels) or without (eight channels)

G3PA
Optimum design of the heat sink has contributed to the downsizing of this product. The power element cartridges of G3PA are easily replaceable for easy maintenance. G3PA can be mounted on a DIN-rail or using screws.
– 10-60A output current
– 24-480VAC output voltages
– Applicable with 3-phase loads
– Replaceable power element cartridges
– All features can be delivered with or without heat sink

G3NA
All models feature the same compact dimensions to provide a uniform mounting pitch. A built-in varistor effectively absorbs external surges. The operation indicator enables monitoring operation.
– 5-90A output current
– 24-480VAC/5-200VDC output voltages
– Built-in varistor
– Operation indicator (red LED)
– Protective cover for greater safety

MKS(X)
The MK-S(X) is the smallest relay in the world that can switch 220VDC 10A resistive load. Applications include the safe and reliable switching of valves, solenoids, contactor coils and other instances where high resistive loads are encountered.
– Suitable for DC-switching
– DC load switching up to 10 A; 220 VDC (resistive load)
– AC load models are capable of switching up to 15 A; 250 VAC (resistive load)
– SPST-NO/SPST-NC contact form enables contact welding detection
– Lockable test button for easy testing

MY4H
Fully hermetically sealed relay is ideal for usage in hazardous locations. It is also available with bifurcated contacts.
– 4PDT contact type
– 3A rated load
– Class 1 Division 2 approval
– Bifurcated contacts available to achieve very low minimum switching current

MYK
Double-winding latch system that holds residual magnetism. The special magnetic materials make changes due to aging negligible, thus ensuring long continuous holding time. There is little change in characteristics such as contact follow, contact pressure, etc. throughout its long life.
– Magnetic latching relay
– DPDT contact type
– 3A rated load
– Excellent vibration/shock resistance
– Built-in operation indicator ensures easy ON/OFF operation monitoring

G4Q
Each contact in the double-pole contact mechanism performs alternate make-brake operation at each pulse input and is thus ideal for alternate operation or transfer/switching operation of a motor.
– Positive operation is assured due to the unique ratchet mechanism
– Satisfies dielectric strength of 2,000VAC
– Low power consumption (AC: approx. 6.4VA; DC: approx. 3.9W)
– DPDT contact configuration

G3RV
As well as being slim and thus saving panel space, G3RV relays are very strong, have a large contact area and non-bendable pins. Connection to a PLC is easy and achieved faultlessly in a few seconds via click connectors. In addition, power switching in G3RV relays with DC outputs is managed by a MOSFET in the output, which has ideal heat dissipation characteristics.

G3R-I/O
High-speed models with optimum input ratings for a variety of sensors are available, as well as input and output modules that can be used instead of the G2RS. Use a coupler conforming to VDE 0884 and assuring an I/O dielectric strength of 4,000V.
– 1.5 and 2A output current
– 5 to 200VDC/100 to 240VAC output voltages
– Compatible with G2RS electromechanical relays
– DIN-rail mounting via sockets
– Operation indicator to confirm input

G3F/G3FD
This SSR is compatible in shape and size with the MY series of relays and is mounted on a DIN-rail using a socket.
– 2 and 3A output current
– 4 to 110VDC/100 to 240VAC output voltages
– Compatible with MY electromechanical relays
– DIN-rail mounting via sockets
– Operation indicator to confirm input

G3H/G3HD
This SSR is compatible in shape and size with the LY series of relays and is mounted on a DIN-rail using a socket.
– 3A output current
– 4 to 48VDC / 100 to 240VAC output voltages
– Compatible with LY electromechanical relays
– DIN-rail mounting via sockets
– Operation indicator to confirm input